EPOXY GROUT MULTIFILL-EPOXY THIXO ISOMAT СИВА

Code: 249491
MULTIFILL-EPOXY THIXO СИВ 3KG
In stock
Shipping:
Order now and pick up from: "" – in 7 days
Free delivery
Price:  46.99 €
Quantity

Tile grout

ISOMAT MULTIFILL-EPOXY THIXO Epoxy Tile Grout, Grey, 3 kg

Chemically resistant grout for bathrooms, pools and professional kitchens that stays clean after wet cleaning.

ISOMAT MULTIFILL-EPOXY THIXO is a two-component, solvent-free epoxy grout in grey that doubles as an adhesive for floor tiles. It fills horizontal and vertical joints from 1.5 to 10 mm wide and shrugs off acids, alkalis, cleaning agents, sea and salt water. The 3 kg pack contains components A and B pre-measured in the exact ratio.

Stands up to acids, alkalis and cleaning agents

Stands up to acids, alkalis and cleaning agents

Tested to ASTM D 543-84 and EN 12808-1, the grout changes weight by less than 1.2% after seven days in 30% sulphuric acid, 5% acetic acid or 60% sodium hydroxide, with no damage to the material. That is why it is specified in breweries, abattoirs, dairies, laboratories and professional kitchens where washdowns are aggressive and daily.

Thixotropic mix holds in vertical joints

The stiff, non-sag consistency lets you grout walls and floors at the same pace. Work the mix in diagonally with a rubber float, then lift the excess with a damp hard sponge while it is still fresh.

Over 45 N/mm² compressive strength for heavy traffic

The cured material shows abrasion below 250 mm³ and performs from -30 °C to +80 °C. It is walkable after 16 hours, takes partial loading after 48 hours and full loading after 7 days at +23 °C.

Safe for surfaces in contact with food

Surfaces grouted with this material meet W-347, EPA 330.5 and EPA 110.2 for direct food contact. The product carries the A+ rating under the French VOC emissions regulation and is completely safe once cured.

Five minutes mixing, 45 minutes pot life

Add the whole of component B to component A and blend for about five minutes with a low-speed mixer at 300 rpm, reaching the sides and bottom of the pail. Tiles and tools clean up with water within 45 minutes at +23 °C. Workability is best when laying between +15 °C and +25 °C.

Specifications

General

ISOMATBrand
MULTIFILL-EPOXY THIXOModel
249491Article number
5204856422275EAN
Two-component epoxy resin (tile grout and adhesive)Type
GreyColour
3 kg (A+B)Pack size
R2 to EN 12004, RG to EN 13888, CE markedClassification
Class A+; max. 350 g/l VOC in the ready productVOC emissions

Application

1.5 – 10 mmJoint width
100 : 6.5 by weight (A : B)Mixing ratio
0.2 – 5.0 kg/m²Consumption
~ 45 min at +23 °CPot life
Within 45 min at +23 °C, with waterCleaning window
+10 °CMinimum application temperature
After 16 h at +23 °CFoot traffic
After 48 h at +23 °CPartial loading
After 7 days at +23 °CFull loading

Technical data

1.65 kg/l at +23 °CDensity (A)
1.55 kg/l at +23 °CDensity (A+B)
> 45 N/mm²Compressive strength
> 30 N/mm²Flexural strength
< 250 mm³Abrasion resistance
< 1.5 mm/mShrinkage
< 0.1 gWater absorption after 240 min
> 2.0 N/mm² (after 7 days)Initial shear adhesion strength
> 2.0 N/mm² (after 21 days)Shear adhesion after water immersion
> 2.0 N/mm²Shear adhesion after thermal shock
-30 °C to +80 °CService temperature
Class EReaction to fire

Storage

24 months in unopened packagingShelf life
+5 °C to +35 °CStorage temperature

In the pack

Component A (resin) and component B (hardener), pre-measuredIn the pack
BrandISOMAT
MODEL
СИВА
EAN5204856422275
No documents were found for this product