ПРОТОЧЕН БОЙЛЕР CLAGE CEX9 NEW

Code: 141468
ПРОТОЧЕН БОЙЛЕР CLAGE CEX9 NEW
In stock
Short Description
  • KIND : ELECTRIC
  • HEIGHT : 29.40 см
  • WIDTH : 17.70 см
  • DEPTH : 10.40 см
  • WARRANTY : 24 MONTHS
Shipping:
Order now and pick up from: "" Today
Free delivery
See credit plans
from11 .58
Interest, fees and APR
PB Лични Финанси
10х30.65
Price:  306.50
Quantity

Tankless water heater

CLAGE CEX9 NEW Tankless Water Heater, 8.8 kW, Electronic Control, Energy Class A

Hot water the moment you open the tap, with no tank and no standby losses.

The CLAGE CEX9 NEW tankless water heater is a compact, electronically controlled unit for a washbasin, kitchen sink or shower. Water is heated as it flows through, while the target temperature is set from 20 °C to 55 °C via buttons and shown on the LCD display. At 29.4 cm high, it runs on a standard single-phase 230 V supply.

Steady temperature without mixing in cold water

TWIN TEMPERATURE CONTROL TTC electronics hold the selected value within the appliance's capacity even when line pressure changes. Temperature is set by button, and two preset keys store your favourite values for quick switching between sink and shower.

6.6 or 8.8 kW selectable during installation

The Multiple Power System MPS lets the electrician cap the connected load to match the fuse box and cable cross-section. At 8.8 kW the unit delivers 3.8 l/min at a 33 K temperature rise, enough for a shower or a double washbasin.

IES bare-wire heating system for less limescale

The heating system puts the bare wire in direct contact with the water, which limits scale build-up and extends service life. With just 0.3 l of heated volume, hot water arrives almost immediately after the tap is opened.

Under-sink or over-sink installation with G ½″ connections

External G ½″ threaded connections and small dimensions allow fitting inside a sink cabinet or directly on the wall above it. The heater works pressurised up to 1 MPa (10 bar), carries IP 25 protection, and ships with two seals, two aerators and a shut-off valve.

Smartphone control and solar pre-heating

The model is prepared for the FX wireless remote and the Smart Control app via an FXE adapter and CLAGE Home Server, supplied separately. An inlet temperature of up to 60 °C allows it to reheat water coming from a solar system.

Specifications

Main

Tankless, electricType
Yes, pressurised (pressureless operation also approved)Pressurised operation
Electronic, push-buttons with LCD displayControl
20 – 55 °CSet temperature range
A (scale A+ to F)Energy class

Power and supply

8.8 kW (switchable to 6.6 kW via MPS)Nominal power rating
1~ / N / PE 220 – 240 V AC, single-phase, permanent connectionSupply voltage
38 A at 8.8 kW / 29 A at 6.6 kWNominal current at 230 V
6 mm² at 8.8 kW / 4 – 6 mm² at 6.6 kWRequired cable cross-section
IES bare-wire heating systemHeating system

Hydraulic data

3.8 l/min at 8.8 kW / 2.9 l/min at 6.6 kWHot water output at Δt = 33 K
2 l/minSwitch-on flow rate
5 l/minMaximum flow rate
1 MPa (10 bar)Maximum operating pressure
G ½″ external threadWater connections
60 °CMaximum inlet temperature
0.3 lNominal volume
≥ 1100 ΩcmSpecific water resistance at 15 °C
IP 25Protection class

Dimensions and weight

29.4 cmHeight
17.7 cmWidth
10.4 cmDepth
approx. 2.7 kgWeight filled with water

In the box

FX / FXS 3 (C) remote, FXE 3 (C) Bluetooth adapter, CXH hand shower, CSP 6 aeratorsCompatible accessories
BrandCLAGE
MODEL
CEX9 NEW
KIND
ELECTRIC
HEIGHT
29.40 см
WIDTH
17.70 см
DEPTH
10.40 см
TYPE
PRESSURIZED
ELECTRICAL POWER TYPE
MONOPHASIC
NOMINAL POWER KW
8.8 KW
ENERGY CLASS
A
WARRANTY
24 MONTHS
EAN4010436264392