Instantaneous water heater
ELDOM E31 Instantaneous Water Heater for Sink, 3.3 kW, Open Outlet
Hot water the moment you open the tap, with no tank and no waiting.
The ELDOM E31 instantaneous water heater warms water as it flows and mounts right beside the sink in a kitchen, bathroom or utility room. At just 6.00 cm deep it takes almost no wall space, while a capillary thermostat holds the temperature you set.
3.3 kW for instant hot water at the sink
Water is heated as it passes through the unit, so there is no warm-up time and no standby losses from a storage tank. Power is single-phase 230 V, with a minimum cable cross-section of 2.5 mm².
Open-outlet model for non-pressurised installation
The heater works in a non-pressurised system and pairs with a free-flow mixer tap, so the pipe is never held under pressure. This is the standard setup for a single kitchen or utility sink.
Mechanical thermostat with external capillary
You set the temperature with a rotary control and it is maintained without electronics that need re-setting after a power cut. Servicing is straightforward and parts are easy for a technician to replace.
IP24 protection and energy class A
IP24 rating allows installation in humid rooms exposed to water splashes. Rated on the XXS load profile, the unit falls in energy class A with annual consumption of 465 kWh.
Specifications
General
Electric instantaneous water heaterType
Over-sinkInstallation
Open outlet (non-pressurised)Outlet type
Mechanical, external capillaryThermostat
IP24IP rating
Power and supply
3.3 kWRated power
230 V~Voltage
Single-phaseSupply type
2.5 mm²Min. supply cable cross-section
AEnergy class
XXSLoad profile
Dimensions and weight
40.00 cmHeight
22.90 cmWidth
6.00 cmDepth
English 
