Submersible dirty water pump

Einhell GC-DP 3325 Submersible Dirty Water Pump, 330 W

Moves up to 9,500 l/h of water with solids up to 25 mm.

The Einhell GC-DP 3325 submersible dirty water pump handles solids up to 25 mm, making short work of flooded cellars, excavation pits, ponds, pools, cisterns and rain barrels. A steplessly adjustable float switch starts and stops the pump with the water level, while the side outlet takes 25/32 mm hoses or a G1 thread.

9,500 l/h flow from a 330 W motor

The motor lifts water to a 6 m head at 0.6 bar and works submerged to a depth of 7 m. Water temperature may reach up to 35 °C.

Stepless float switch for automatic operation

Switch-on and switch-off levels are set by the length of the float cable. The pump can be left to drain a cellar or pit unattended and stops before the motor runs dry.

Impact-resistant housing with folding handle

The housing is moulded from impact-resistant plastic and a high-grade mechanical seal protects the motor during long runs in dirty water. The folding handle also lets you lower the pump on a rope into a shaft or well.

47.8 mm side outlet with adapters included

The G1 1/2 (47.8 mm) internal thread sits on the side of the pump; the supplied 90° elbow and universal adapter accept 25/32 mm hoses and a G1 (33.3 mm) thread. The 10 m power cable usually reaches the nearest socket without an extension lead.