Submersible borehole pump

DAEWOO DBP2500 Submersible Borehole Pump, 1200 W, 135 m Head

135 m head and a stainless steel body built for 4-inch boreholes and wells.

The DAEWOO DBP2500 submersible borehole pump draws water from deep wells and boreholes with 1200 W of input power. Its 100 mm body fits standard 4-inch casings, while the 2600 l/h flow rate supplies irrigation lines, storage tanks or a household water system.

135 m head for deep boreholes

The progressive cavity screw element builds up to 13.5 bar and holds pressure steadily at low flow against high resistance, exactly what a narrow borehole with a long riser pipe demands. Immersion depth ranges from 5 to 30 m.

Stainless steel body for permanent submersion

The casing and the metal working parts in the pump section withstand constant contact with water up to 40 °C. The 100 mm diameter and vertical installation suit a standard borehole casing.

Protection against overload, overheating and dry running

The motor also cuts out on excessively high or low supply voltage, a common cause of burnt-out pumps in rural areas. The 20 m cable reaches the water without an intermediate joint in most domestic boreholes.