English 
MIG WELDING MACHINE GYS SMARTMIG 110
- TYPE WELDING MACHINE : INVERTOR
- MAX WELDING CURRENT : 110 A
- MAX ELECTRODE DIAMETER : 0.9 мм
- SUITABLE FOR : DIY USE
GYS SMARTMIG 110 NO GAS Wire-Feed Welder, 40–110 A
Flux-cored welding without a gas bottle, straight from a 230 V household socket.
The GYS SMARTMIG 110 is a NO GAS wire-feed welder for steel, running 0.9 mm flux-cored wire. Welding current is adjustable from 40 to 110 A, it takes 100 mm reels and plugs into a standard 230 V socket.
NO GAS process for outdoor jobs
Flux-cored wire shields the weld pool on its own, so no bottle, regulator or hose is needed. Wind on site does not blow the shielding away as it does with gas MIG/MAG. The machine is set up for steel with 0.9 mm wire.
SMART board: set it by sheet thickness
The panel offers two voltage positions plus stepless wire-feed speed. The printed chart shows the recommended combination for each sheet thickness, cutting the trial-and-error before the first bead.
Runs off a standard 230 V / 13 A socket
Connected power is 3 kVA on single-phase supply, so no dedicated welding circuit is required in the garage or workshop. Generator operation is supported as well.
Supplied with a 2.2 m torch and earth cable
The set includes a 2.2 m fixed torch, an earth cable with clamp and a 0.9 mm feed roller. It uses widely available 100 mm reels holding 1 kg of wire.
Specifications
Key facts
Welding performance
Power and supply
In the box
Key facts
| Brand | GYS |
| MODEL | SMARTMIG 110 |
| TYPE WELDING MACHINE | INVERTOR |
| MIN WELDING CURRENT | 40 A |
| MAX WELDING CURRENT | 110 A |
| MAX ELECTRODE DIAMETER | 0.9 мм |
| WELDING CURRENT CONTROL | Yes |
| COOLING | Yes |
| PRODUCT WEIGHT | 13.500 kg |
| SUITABLE FOR | DIY USE |
| WARRANTY | 24 MONTHS |
| EAN | 3154020033993 |
