Scroll saw

Einhell TC-SS 406 E Scroll Saw, 120 W, 406 mm Throat

Clean, intricate cuts in wood for model making, décor and fine joinery

The Einhell TC-SS 406 E benchtop scroll saw is built for fine, intricate work: model parts, toys, lettering and decorative pieces. Variable stroke speed, a tilting steel table for bevel cuts, and a blower plus dust port keep each cut accurate and the bench tidy.

406 mm throat for larger panels

The distance from blade to rear arm lets you swing and steer wide boards without the frame getting in the way. Maximum cutting height is 50 mm at 90°. A 415 x 250 mm table supports the workpiece along its full length.

Variable speed to match the material

Electronic control varies the stroke rate from 400 to 1600 strokes per minute. Lower speeds give you control on tight curves and thin stock, while higher speeds move faster through straight cuts in thicker wood. Blade stroke is 14 mm.

Steel table tilts to 47° for bevel cuts

An angle scale under the table lets you set the bevel precisely. At 45° the saw handles stock up to 23 mm thick. The table also tilts 2° the other way.

Blower and 36 mm dust port keep the cut line visible

A built-in blower clears sawdust from the table, so you can always see the line you are following. The 36 mm extraction port connects to a wet and dry vacuum to keep the work area clean.

Quick blade changes with the clamping device

The clamping device makes blade swaps quick. The saw accepts 127 mm pin-end and round blades. Two blades come in the box, and Einhell offers 5-piece and 10-piece blade sets as optional accessories.