Scroll saw

Einhell TC-SS 405 E Scroll Saw, 120 W

Cut precise curves and fretwork in wood with electronically controlled 400–1600 strokes per minute.

The Einhell TC-SS 405 E scroll saw cuts curves, fretwork patterns and model-making parts in wood and plastic, following your marked line. Its metal table tilts up to 45° and the electronic speed control lets you match the cut to the material and its thickness. Supplied with 127 mm saw blades, the saw is ready to work straight out of the box.

Electronic speed control for a clean cut in every material

The Einhell TC-SS 405 E lets you dial the stroke rate anywhere between 400 and 1600 min⁻¹. Lower speeds keep thin plastic and veneer from overheating, while higher speeds get you through solid timber faster.

Tilting 408 x 250 mm metal table for bevel cuts

The work table of the Einhell TC-SS 405 E tilts up to 45° and supports the workpiece across its full area. That makes bevelled edges for joints and frames easy, with no need to tip the piece by hand.

Blow-off device and dust extraction adapter

A built-in nozzle on the Einhell TC-SS 405 E blows chips off the cutting line so your marked contour stays visible. The extraction adapter connects a vacuum and keeps the bench clean.