Robotic pool cleaner

AIPER Scuba X1 Cordless Robotic Pool Cleaner for In-Ground Pools up to 200 m²

Floor, walls and waterline in a single run, with no hose and no power cord.

The AIPER Scuba X1 is a cordless robotic pool cleaner built for in-ground pools up to 20 m long and 200 m² in area. It vacuums the floor, climbs the walls and scrubs the waterline, collecting leaves, sand and algae in a 5 L top-load basket. Start it with the single button on the housing or from the Aiper app.

Dual-jet suction rated at 25,200 LPH

Four brushless motors keep the pull steady even at depth, and twin jets instead of one stop coarse debris from slipping back out. Pebbles, wet sand and fallen twigs are picked up on the first pass.

Two-stage MicroMesh filtration for dust, pollen and algae

Use the basket for leaves and bulky debris, and the replaceable 3 μm ultra-fine filter for the fine sand, dust and algae that standard media let through. Rinse it with a hose after each cycle; a spare is included in the box.

14 sensors and WavePath 3.0 navigation for complex shapes

Ultrasonic sensors spot steps, inlets and drain covers in advance and the unit slows down before them. The route adapts to the basin shape, avoiding endless loops and skipped areas in oval or irregular pools.

WaveLine 2.0 waterline cleaning with horizontal scrubbing

The greasy ring at water level is worked with a horizontal motion, with the cleaner rising above the surface to cover the full band. Walls are covered in an N-shaped pattern from top to bottom, leaving no untouched strips between passes.

Five modes plus control from the Aiper app

Choose between floor, walls, waterline, the standard button-start cycle and scheduled cleaning set in the app. The app reports status and cleaning stats, while Smart Retrieval parks the unit at the edge so you can lift it out with the supplied hook.