RAIDER RD-WP46 Submersible Dirty Water Pump, 400 W
Moves up to 7,500 l/h of water with solids up to 25 mm.
The RAIDER RD-WP46 submersible dirty water pump delivers 400 W of drainage power for flooded basements, sump pits, garden ponds and rain barrels. It handles water carrying solids up to 25 mm and connects to a standard hose through its 1" discharge port.
7,500 l/h flow clears water fast
The pump shifts 125 litres per minute, so a flooded cellar or sump empties in minutes instead of being bailed out by hand. A 5 m head lifts the water up to a drain or manhole above the pumping point.
Solids up to 25 mm pass without clogging
The intake openings and impeller let dirty water with leaves, silt and small gravel through. That is the difference from clean-water pumps, which block at the first handful of debris.
Float switch starts and stops the pump automatically
Water level controls operation: the motor starts as the level rises and switches off once the pit is drained. The unit can stay in place in a cellar or sump and react without anyone attending it.
10 m cable and 7 m submersion depth
The supply cable lets the pump go deep into a shaft while the socket stays dry. IPX8 protection covers continuous underwater operation, with about 4 m as the recommended working depth.