The MAKITA DHG181ZK cordless heat gun runs on an 18V LXT battery and delivers up to 200 l/min of hot air for stripping paint and lacquer, shrinking cable sleeves, applying films and thawing pipes. Temperature is set on a 6-stage dial and airflow on a two-position switch. Supplied in a carry case with four nozzles; battery and charger sold separately.

Cordless freedom on any job site

The MAKITA DHG181ZK is powered by an 18V LXT battery, so hot air travels with you onto a roof, into a vehicle or into a room without power. No cord to run, no socket to find. At 0.7 kg bare, the heat gun stays comfortable in one hand.

Six-stage temperature dial for different materials

A dial on the MAKITA DHG181ZK sets the temperature in 50 °C steps up to 550 °C. Lower settings suit delicate films and window tint, while the top settings soften old paint and varnish before scraping.

Two airflow stages — 120 and 200 l/min

A slide switch picks the low flow for precise work on small details or the high flow when a larger surface needs heat. With a fully charged 6.0 Ah battery, the MAKITA DHG181ZK runs continuously for about 21 minutes on the high stage.

Four nozzles and carry case included

The MAKITA DHG181ZK case holds a glass protection nozzle, a wide-slot nozzle, a reflector nozzle and a 20 mm reduction nozzle. Nozzles swap with a quick twist, and the built-in job light illuminates the work spot in dim conditions.