Fence panel

POLARGOS LAVENDER Fence Panel 1.50 x 2.00 m, Steel, Anthracite RAL 7016

Horizontal slats with a semi-matt powder finish: partial visibility without giving up security.

The POLARGOS LAVENDER fence panel measures 2.00 m wide and 1.50 m high and is part of a steel fencing system with zinc anti-corrosion protection. Horizontal slats of varying widths let daylight into the yard while shaping a modern street frontage. Matching single and double gates complete the range.

Galvanised steel with an MDS powder finish

A fine-textured powder coating in anthracite RAL 7016 is applied over the zinc layer. The surface stays smooth and semi-matt, while the coating shields the steel from rust in permanent outdoor use.

40x40 mm frame and slats in three widths

The panel is a steel frame filled with 40x20 mm and 100x20 mm horizontal profiles plus a solid 255x23 mm section. Alternating narrow strips and solid bands give the fence rhythm and block direct views without closing the yard off completely.

Mounting between posts or masonry columns

The clear span between posts is 202 cm. The 50x50 mm square posts, 2.0 m tall, are either concreted into the ground or bolted onto an existing concrete footing, and the panel can also be fitted between two masonry columns.

A design that pairs with stone, concrete, timber and WPC

The semi-matt anthracite tone sits equally well next to brick and stone columns, walls and concrete footings. The system also works as a screen for terraces, large balconies, verandas and courtyards at homes and office buildings.