English 
HOSE CLAMP 1/2'' GARDENA 07190-20
- MODEL : 07190-20
- TYPE : СКОБИ
GARDENA 07190-20 Hose Clamp 1/2", 10-16 mm Clamping Range
Worm-drive tightening with a hex head for a leak-free grip on any spigot or connector.
The GARDENA 07190-20 hose clamp secures a 1/2" hose onto a spigot, pump port or connector and keeps the joint dry under pressure. It tightens over a 10-16 mm range with a 9 mm wide band and is built to DIN 3017.
10-16 mm clamping range for 1/2" hoses
The span covers standard 12.7 mm garden hoses as well as tubing of similar outside diameter. The same clamp works on a pump inlet, a threaded tap spigot or a repair connector.
Worm-drive screw with slotted hex head
Tighten it with a spanner or an ordinary screwdriver, whichever is at hand. The thread lets you dial in the pressure gradually without crushing the hose wall.
Bright galvanised steel to DIN 3017
The band is bright galvanised steel, so it stays outdoors, in spray water and against damp soil. Its 9 mm width spreads the load evenly around the hose.
Specifications
Key facts
Dimensions
Materials
In the box
| Brand | GARDENA |
| MODEL | 07190-20 |
| TYPE | СКОБИ |
| ADDITIONAL INFORMATION | "10-16 ММ, 12.7 ММ (1/2"")" |
| EAN | 4078500719001 |