The TESY HPWH 3.2 150 from the AquaThermica Compact line is a wall-hung air-to-water heat pump water heater in a 1682 mm vertical casing. The heat pump alone takes water to 60 °C, while the built-in 1.5 kW electric element extends this to 70 °C. With load profile L and 178 l of mixed water at 40 °C, it comfortably serves a three to four person household.
Specifications
Main
Air-to-water heat pump, verticalType
Wall-hungInstallation
143 lTank capacity
178 lMixed water at 40 °C (V40)
LDeclared load profile
Efficiency
A+ (average climate conditions)Energy class
884 kWh/yearAnnual electricity consumption
3.4COP (DHW)
0.68 kWRated heat output (A7/W55)
0.239 kWAverage heat pump power draw
9:08 h:minHeating time
4:20 h:minHeating time in BOOST mode (A7/W10-55)
Power and supply
1.500 kWRated power (electric element)
1.83 kW (0.330 kW heat pump + 1.500 kW element)Maximum power consumption
7.9 AMaximum current
1/N/220-240 V, 50 HzPower supply
16 A T fuse / 16 A automatic switch, characteristic CRequired protection
IPX4Degree of protection
Operating conditions
-5 °C to +43 °C (90% RH)Heat pump air intake temperature
4 °C to 40 °CInstallation site temperature
60 °C (70 °C with electric element)Max. settable water temperature
8 barMaximum working pressure
50 dB(A)Sound power level, indoor
58 dB(A)Sound power level, outdoor
Design
Rotary, thermal circuit breaker with automatic resetCompressor
Centrifugal, 235 m³/h at 60 PaFan
125 mmAir duct diameter
R513a, 760 g (GWP 631)Refrigerant
Active hot gas defrost with 2-way valveDefrosting
Materials
Magnesium anode Ø32x270 mm, 360 gCorrosion protection
50 mm rigid polyurethaneThermal insulation
Aluminium, wrapped externally, not in contact with waterCondenser
Dimensions and weight
1682 mmHeight
82 kgTransport weight
In the box
1/2" 8.3 bar safety valve, dielectric fittings, L 10x95 hooks and dowels for wall mountingIn the box