English 
МОТОРНО МАСЛО XTEC 5W40 5L BARDAHL BAR-36343
- MOTOR OIL TYPE : SYNTHETIC
- VISCOSITY : 5W40
- PACKAGE-L : 5.000 L
BARDAHL XTEC 5W40 C3 Fully Synthetic Engine Oil, 5 L (BAR-36343)
Low-ash formulation for cars with a particulate filter and extended drain intervals.
BARDAHL XTEC 5W40 C3 is a fully synthetic engine oil in a 5 L pack for petrol and diesel engines, with or without a turbocharger. Its midSAPS formulation protects the diesel particulate filter on vehicles meeting EURO IV and EURO V emission standards. It carries approvals from VW, Mercedes-Benz, BMW, Renault, Ford, Porsche and GM.
DPF protection thanks to midSAPS technology
Sulphated ash content stays below 0.80%, limiting the incombustible residue that clogs a particulate filter. The oil meets ACEA C3-12 with C2 engine protection plus API SN-SM/CF. A sound choice for cars doing city mileage with frequent DPF regenerations.
Stable oil film at high temperatures
The high-HTHS formulation holds 14.3 mm²/s viscosity at 100 °C, with a flash point of 226 °C. A viscosity index of 172 means little change between cold start and full operating temperature. Wear protection stays in place during sustained motorway runs or towing.
Easy cold starts, pour point at -39 °C
Viscosity at -30 °C stays under 6600 mPa.s, so oil reaches the furthest lubrication points quickly on winter mornings. The 5W40 grade covers year-round use in Bulgarian conditions.
Factory approvals for VW, Mercedes-Benz, BMW and Ford
The list covers VW 502.00/505.00/505.01, MB 229.31 and MB 226.5, BMW Longlife-04, PORSCHE A40, FORD WSS-M2C-917A, RENAULT RN0700/RN0710 and GM Dexos 2. It is specifically recommended for pump-injector diesel engines. Always check the grade required in your vehicle handbook before topping up.
Specifications
General
Specifications and approvals
Technical data
| Brand | BARDAHL |
| MODEL | BAR-36343 |
| MOTOR OIL TYPE | SYNTHETIC |
| VISCOSITY | 5W40 |
| PACKAGE-L | 5.000 L |
| ADDITIONAL INFORMATION | БЕНЗИН/ДИЗЕЛ |
| EAN | 3266720363437 |
Accessories
