Pressure reducer for drip irrigation

GARDENA Master Unit 1000 Pressure Reducer 01355-20 for Micro-Drip-System, 1000 l/h

The starter module that feeds your system clean water at exactly the right pressure.

The GARDENA Master Unit 1000 (01355-20) is the starter component of the GARDENA Micro-Drip-System. Fitted between the tap and the pipework, it drops mains pressure to around 1.5 bar and filters the water before it reaches the drip heads and spray nozzles. Connectors for 4.6 mm (3/16") supply pipe and 13 mm (1/2") connecting pipe are included.

About 1.5 bar working pressure for even dripping

Drip heads and spray nozzles only deliver their rated output when the pressure is reduced and stable. The unit takes water straight from the mains and passes it on already regulated, with nothing to adjust.

Built-in filter that lifts out for cleaning

Particles in tap water clog the narrow channels of drippers first. The filter traps them at the inlet and pulls out by hand for a rinse under running water.

Quick & Easy connection, no tools

The patented coupling system lets pipes be attached, extended and released by hand. Before winter the module comes off in a couple of minutes and can be stored frost-free.

Two connector sizes in the box

Supplied ready to fit, with a tap adapter and connectors for 4.6 mm (3/16") supply pipe and 13 mm (1/2") connecting pipe. The layout can start with a main line running to the beds or directly with the thin supply pipe.