Garden pump

EINHELL GC-GP 1045 Garden Pump, 1050 W

4,500 l/h of water for irrigation from a cistern, rain barrel or well.

The EINHELL GC-GP 1045 garden pump moves up to 4,500 l of clean water per hour and lifts it to a delivery head of 48 m. It draws from depths of up to 8 m, making it a full-time water source for an irrigation line, a rain barrel or a shaft. Connections are 42 mm (1 1/4" male thread) on the suction side and 33.3 mm (1" female thread) on the pressure side.

1,050 W for a 48 m delivery head

The motor covers a branched sprinkler line with several nozzles, or moves water uphill across a sloping plot. Maximum pressure is 4.8 bar with clean water at up to 35 °C.

Large filler opening with water level indicator

The wide opening makes priming quick, and the indicator shows at a glance whether the housing already holds water — no dry running after a long standstill.

Drain screw for winter storage

Residual water is emptied through the drain screw before the pump is stowed for the season. Frozen water inside the housing is the most common cause of cracked casings on seasonal equipment.

Thermal cut-out against overload

The motor switches off automatically when it overheats — for instance with a clogged suction filter. High-quality mechanical seals keep the pump chamber tight during long runs.

Carry handle for moving between water sources

At 9.5 kg the unit is carried by hand from the barrel to the well and back. The On/Off switch sits on top, within easy reach while the pump is running.