Cordless brush cutter / trimmer

RAIDER PRO RDP-SBC20 Cordless Brushless Brush Cutter, 40 V (2x20 V), 30 cm Cutting Width, Blade and Trimmer Head, Solo

Two R20 batteries in one machine — 40 V of cordless power for grass and tougher growth.

The RAIDER PRO RDP-SBC20 cordless brushless brush cutter runs on two 20 V batteries from the R20 system (40 V in total) and cuts a 30 cm swath with either line or blade. It is supplied Solo — without batteries and charger — for owners of existing R20 packs. The trimmer head with line, the cutting blade and the guard are included.

Brushless motor with over 80% higher efficiency

Lower energy losses in this motor type translate into more mowing per charge and a longer service life. No-load speed reaches 7500 min⁻¹ for clean, even cutting even in denser growth.

Blade and trimmer head — two ways to cut

The 1.6 mm line trims grass along fences, kerbs and trees, while the steel blade tackles tougher weeds and overgrown patches. Switching between them is done on the spot, following the steps in the manual.

Runs on R20 batteries — one battery fits all

The cutter takes two 20 V Li-Ion packs from the RAIDER PRO R20 System, shared with the rest of the range. The Solo version comes without batteries or charger, so you pick the capacity that suits your plot.

Folding shaft for compact storage

The design folds down for transport in a car boot and takes up less room in the shed. An auxiliary handle and a safety lock-off button against accidental start-up complete the ergonomics.

Sound pressure level of 80.6 dB(A) at the operator position

The measured value at the operator is 80.6 dB(A) with K=3.0 dB uncertainty, and the sound power level is 96 dB(A). Vibration is 4.549 m/s² — always wear hearing and eye protection.