Cordless framing nailer

DeWALT DCN930P2-QW 18V XR Brushless Cordless Framing Nailer, 2x 5.0 Ah

Drives 50–90 mm nails with no compressor and no hose — just a battery and the trigger.

The DeWALT DCN930P2-QW cordless framing nailer is a professional 18V XR tool built for timber framing, sheathing, roofing and formwork. It fires paper-collated nails from 50 to 90 mm long and 2.8 to 3.3 mm thick. Two 5.0 Ah batteries and a charger are included, so one pack keeps working while the other charges.

No compressor, no hose, anywhere on site

The DeWALT DCN930P2-QW runs purely on an 18V XR battery, so there is no compressor to drag up floors or onto a roof. The nailer is ready the moment the pack clicks in — ideal for short bursts of work and for moving between positions.

Brushless motor for longer life and more shots

A brushless motor has no wearing carbon brushes and uses battery energy more efficiently. On the DCN930P2-QW that means more nails driven per charge and a longer service life for the tool.

Two firing modes — sequential and bump

A switch selects sequential firing for precise placement of each nail or bump mode for fast, repeated shots as the nose is pressed against the surface. The nailer therefore suits both careful assembly and quick sheathing of large areas.

Tool-free depth adjustment

A hand-turned thumb wheel sets how flush or how deep the nail head sits in the timber. Adjusting takes seconds when moving from soft to hard wood.

Works with the whole 18V XR system

The nailer accepts DeWALT 18V XR batteries shared with drills, grinders and lights from the same platform. A built-in LED work light illuminates the nose area in shaded corners and tight spaces.