Cordless brad nailer

DeWALT DCN210SN-XJ 18V XR Brushless Cordless 18GA Brad Nailer (Tool Only)

Trim and finish nailing from 15 to 50 mm, with no compressor, hose or gas cartridges

The DeWALT DCN210SN-XJ is a brushless cordless brad nailer from the 18V XR platform, built for 18GA brads from 15 to 50 mm. It handles professional finishing work such as skirting, casings, mouldings and furniture parts. It comes as a bare tool, so you can run it on the 18V XR batteries you already own.

Mechanical drive with no gas and no compressor

The nailer drives each brad on 18 V battery power alone, so you never buy gas cartridges. Running costs stay low and performance stays consistent in cold conditions. With no hose or compressor to drag along, moving between rooms is quick.

Brushless motor drives brads up to 50 mm

The brushless motor lasts longer and makes better use of every battery charge. DeWALT rates the tool at up to 5 nails per second, which keeps long runs of skirting and casing moving.

Compact body for tight spaces

The DCN210 is DeWALT's next-generation compact 18GA nailer. A shorter, lighter body and ergonomic grip make it easier to work under cabinets, into corners and around window frames, with less strain on your hand during repetitive fixing.

Tool-free depth control and jam clearing

A thumbwheel sets the drive depth, so heads sit flush or slightly countersunk. Sequential firing places each brad exactly where you aim. If a nail jams or the driver stalls, you clear it by hand without any tools.

Runs on DeWALT 18V XR batteries

Supplied without battery or charger, the nailer runs on DeWALT 18V XR packs, so it slots straight into an existing XR kit. Three no-mar tips are included to protect delicate surfaces.