Cordless planer

Einhell TE-PL 18/82 Li-Solo PXC Cordless Planer, 18 V, 82 mm

Aluminium soleplate with V-groove and park rest for flat surfaces and clean chamfers on timber

The Einhell TE-PL 18/82 Li-Solo PXC cordless planer takes off up to 2 mm of wood per pass across an 82 mm planing width. It runs on any Power X-Change 18 V battery, so you can trim doors, skirting, beams and furniture wherever the job is, with no socket needed. Supplied as a bare tool without battery or charger.

Solid aluminium soleplate with V-groove for chamfering

The solid aluminium soleplate stays flat and delivers an even finish along the whole workpiece. Its V-shaped groove guides the planer along the edge, so you can chamfer corners accurately without marking them out first.

Parallel guide and rebate depth stop included

The parallel guide keeps the planer at a fixed distance from the edge for straight, accurate passes. The rebate depth stop lets you cut rebates up to 8 mm deep, handy for door leaves and frames.

Reversible TCT planer blade

The blade carries tungsten carbide cutting edges for a smooth surface finish. When one edge dulls, simply flip the blade and carry on with the second. The cutter shaft spins at 15000 rpm under no load.

Automatic park rest protects blade and workpiece

The rear park rest drops down automatically whenever you set the planer down, keeping the blade clear of the surface. An ergonomic soft-grip handle gives a firm, secure hold through longer planing sessions.

Power X-Change 18 V: up to 48 m per charge on 4.0 Ah

The planer takes any battery from the Power X-Change range you already use with other Einhell tools. Einhell recommends packs of 2.6 Ah or more. According to Einhell, a 4.0 Ah battery planes up to 48 m of spruce at 1 mm depth and 50 mm width.