Underfloor heating / electric heating mat

WARMCOIN Electric Underfloor Heating Mat 6.0 m², 960 W, 230 V

Warm floors in bathrooms and hallways with a build-up of just a few millimetres.

The WARMCOIN 6.0 m² electric underfloor heating mat delivers 960 W at 230 V. The heating cable comes pre-spaced on a self-adhesive mesh that you roll out over the subfloor and cover with tile adhesive or levelling compound. It covers 6 m² of free floor area and works as both primary and supplementary heating.

960 W across 6 m² of floor

That works out at roughly 160 W per square metre, the usual figure for tiled bathrooms, hallways and kitchens. Measure the free floor only: the mat is not laid under the bathtub, cabinets or sanitary ware.

Installs straight into the tile adhesive

Roll the mat out on a clean, primed subfloor and embed it directly, without noticeably raising the floor level. That makes it suitable for refurbishments where every millimetre of build-up counts.

Primary or supplementary heating

The declared application covers both roles: heating a small room on its own, or adding floor-level comfort alongside an existing system. Control is handled by a thermostat with a floor sensor, supplied separately.