Electric underfloor heating

WARMCOIN Underfloor Heating Cable Mat 4.0 m², 640 W, 230 V

Installs directly in the tile adhesive layer without raising the floor level.

The WARMCOIN 4.0 m² underfloor heating cable mat is a ready-to-lay mesh with a pre-spaced twin-core heating cable for electric floor heating under tiles, terracotta and porcelain stoneware. Rated at 160 W per square metre, it works as either primary or supplementary heating and covers 4 m² of heated area on standard 230 V mains.

Laid in the tile adhesive, no screed needed

The mat is rolled out over the substrate and set into the tile adhesive layer; it can also be embedded in a self-levelling compound when required. Room height stays the same, which matters in bathroom or kitchen renovations with existing door levels.

160 W per square metre for primary or supplementary heating

Total output of this item is 640 W at 230 V. The fixed cable spacing spreads heat evenly across the covered area, with no cold strips between the runs.

Twin-core cable under tiles, terracotta and stoneware

The twin-core design brings the cold tail out at one end only, so there is no need to route the cable back to the connection point. Recommended floor finishes are ceramic tiles, terracotta and porcelain stoneware.