UNDERFLOOR HEATING CABLE MAT WARMCOIN 15.0m2

Code: 222842
From the brochure
КАБЕЛ.РОГОЗ.Warmcoin (15.0m2,2400W,230V)КАБЕЛ.РОГОЗ.Warmcoin (15.0m2,2400W,230V)
The offer is valid from 09.09.2026 until 30.09.2026
КАБЕЛ.РОГОЗ.Warmcoin (15.0m2,2400W,230V)
In stock
Shipping:
Order now and pick up from: "" Today
Free delivery
See credit plans
from8 .31
Interest, fees and APR
Unicredit Logo
10х22.00
Price:  219.99
Quantity

Electric underfloor heating

WARMCOIN WCM 15.0 m² Electric Underfloor Heating Mat, 2400 W, 230 V

Installed straight into the tile adhesive layer, with no rise in floor level.

WARMCOIN WCM 15.0 m² Electric Underfloor Heating Mat, 2400 W, 230 V

The WARMCOIN WCM 15.0 m² cable heating mat is a twin-conductor electric underfloor heating system rated at 160 W/m² on a 230 V supply. The heating cable is pre-fixed to a 50 cm wide mesh, 30 m long in total, covering 15 m² in bathrooms, hallways, kitchens or living rooms. It works as primary or supplementary heating under ceramic tiles, terracotta and porcelain stoneware.

Set into tile adhesive, no screed needed

The mat is thin enough to be laid in a 5–8 mm tile adhesive bed, and it can also be embedded in self-levelling compound where required. The 2.5–4 mm cable sits on a mesh that rolls straight onto the prepared substrate. A practical choice for bathroom refurbishments where floor height is tight.

160 W/m² for even heat across the floor

The cable is factory-spaced at a constant pitch on the mesh, spreading heat without cold spots. Total installed output is 2400 W, sized for 15 m² of heated area. The twin-conductor design has a single cold tail, so only one connection runs back to the thermostat.

Control via thermostat and floor sensor

The mat is wired through a thermostat with a floor sensor, holding temperature to within ±1 °C. A conduit with an end cap for the sensor is included, so the probe sits in the floor and stays replaceable. The thermostat is purchased separately, and an RCD plus earthing are recommended for the circuit.

Suitable for wet rooms and shower areas

The screened, earthed heating cable may be installed in bathrooms and tiled walk-in showers, provided the floor waterproofing is done. It must not be laid under a bathtub or a shower tray. The heating cable is never cut or shortened: cut only the mesh and turn the run to fit the room.

Specifications

Main

Twin-conductor cable heating matType
Primary and supplementary heatingApplication

Power and supply

15 m²Heated area
2400 WTotal output
160 W/m²Output density
230 VOperating voltage

Dimensions

30 x 0.5 mMat size
50 cmMat width
2.5–4 mmCable diameter

Installation

In tile adhesive or in screedInstallation method
Ceramic tiles, terracotta, porcelain stonewareSuitable floor covering

In the box

WCM heating mat, conduit with end cap for the floor sensor, installation manualIn the box
Not included, purchased separatelyThermostat
BrandWARMCOIN
MODEL
15.0m2
TYPE
НАГРЕВАТЕЛНА
APPLICATION
ОСН.И ДОПЪЛ.ОТОПЛЕНИЕ
WARRANTY SANITARY
120 МЕСЕЦА
EAN3800235090657
No documents were found for this product