WARMCOIN Electric Underfloor Heating Mat 12.0 m2, 1920 W, 230 V
Thin heating cable sets directly into the tile adhesive, so the floor level barely rises.
The WARMCOIN 12.0 m2 underfloor heating mat covers 12 m² at 1920 W on a 230 V supply. The cable comes pre-spaced on a 50 cm wide mesh with a total run of 24 m, so it rolls straight onto a prepared subfloor. It works as primary or supplementary heating.
160 W per square metre for warm bathroom and hallway floors
This output level can heat a well insulated room on its own, and in already heated rooms it simply keeps the tiles pleasant underfoot. The mat is controlled by a room thermostat with a floor sensor that holds the set floor temperature.
4.2 mm cable embedded in the adhesive layer
The mat is fixed to the subfloor and covered by the tile adhesive, with no extra screed needed. Floor build-up stays minimal, which suits renovations of existing rooms.
24 m of mat, 50 cm wide, rolled in strips
The strip unrolls in parallel runs across the free floor area, and the mesh is cut between the cable loops to turn direction. Plan the coverage around fixed furniture and skip the area under the bathtub.