Cordless telescopic pole pruner

EINHELL GC-LC 18/20 Li T Cordless Telescopic Pole Pruner 18 V, 20 cm Bar, Bare Tool

Prune branches around 3 m up while keeping both feet on the ground.

The EINHELL GC-LC 18/20 Li T cordless telescopic pole pruner runs on the 18 V Power X-Change platform and ships as a bare tool, without battery or charger. A 20 cm bar and 5.5 m/s chain speed handle routine tree and tall-shrub care, while the pole extends from 2.03 m to 2.87 m.

Telescopic pole extends to 2.87 m

High branches come within reach without a ladder, so cutting is done from a stable stance on the ground. The included shoulder strap shifts part of the load off the arms during overhead work.

30°-angled cutting head for clean cuts

The angle keeps the chain square to the limb even when sawing from below. Maximum cut is 19.5 cm, and the quality bar carries a 3/8" pitch chain.

Automatic chain lubrication from a 70 ml tank

Oil is fed to the bar as you work, with no manual top-ups between cuts. Cutters and rails stay cooler, which extends the life of the cutting set.

Metal gearbox and metal bumper spike

The transmission sits in a metal housing built for long service. The spike bites into the wood as a pivot point during the cut, and a chain catcher adds protection if the chain breaks.

Power X-Change 18 V — one battery for the whole garden range

Supplied without battery or charger, the pruner accepts any 18 V Power X-Change pack. A 4.0 Ah battery delivers up to 100 cuts in 70x70 mm timber per charge.