English 
ДВОЕН ДИМООТВОД Ф80-130ММ KAMININOX
KAMININOX Twin-Wall Flue Pipe Ø80-130 mm, 25 cm Length
A short 25 cm section that lets you fine-tune the height of a twin-wall chimney run.
The KAMININOX twin-wall flue pipe Ø80-130 mm is a straight 25 cm section for chimney systems with an 80 mm inner and 130 mm outer diameter. It carries flue gases away from fireplaces, stoves and boilers running on solid fuel, gas or pellets. The short length is made for spots where a full 50 or 100 cm pipe simply will not fit.
Twin-wall build with insulation between the tubes
The Ø80 mm inner tube handles the flue gases, while the Ø130 mm outer tube stays cooler to the touch and limits heat loss along the run. Keeping gas temperature stable supports the draught and reduces condensate build-up inside the pipe.
25 cm length for fine-tuning the run
A quarter-metre section closes the last few centimetres between the stove and an elbow or a wall pass-through. No on-site cutting is needed and every joint keeps its factory profile.
Fits the rest of the Ø80-130 mm system
The pipe assembles with the other KAMININOX twin-wall Ø80-130 mm parts: 45° and 90° double elbows, condensate caps, clamps and wall rosettes. When planning total height, allow for roughly 40 mm lost at each joint in the Ø80 to Ø130 mm range.
Specifications
General
Dimensions and weight
| Brand | KAMININOX |
| HEATING EQUIPMENT TYPE | STOVEPIPES |
| DIAMETER SM | 80.0 см |
| LENGTH | 25.00 см |
| ADDITIONAL INFORMATION | Ф80-130MM 25CM |
| WEIGHT WITH PACKAGE | 0.800 kg |
| EAN | 126000010006 |