Flue pipes & chimney parts

KAMININOX Twin-Wall Insulated Flue Pipe Ø150/200 mm, 50 cm

Straight 50 cm section for fine-tuning the height of your chimney run.

The KAMININOX twin-wall flue pipe Ø150/200 mm is a straight 50 cm section with a 150 mm inner and 200 mm outer diameter. It is used when building or extending chimney runs for fireplaces, stoves and boilers, where a shorter element than the standard 1 m pipe is required.

Twin-wall build with insulation between the tubes

The section consists of two stainless steel tubes with heat-resistant insulation in between. The outer surface stays cooler than the inner flue, and the draught remains steadier where the chimney passes through unheated rooms and the roof.

50 cm length for exact run adjustment

The half-metre size closes the gaps left after the 1 m pipes, elbow and tee are in place. It joins the rest of the Ø150/200 mm system through the standard socket-and-spigot fit.

For fireplaces, stoves and boilers

KAMININOX twin-wall flues carry combustion gases away from wood-burning appliances as well as gas and oil-fired units. The 150 mm inner diameter is one of the most common outlet sizes on fireplaces and solid-fuel stoves.