Thermal imaging camera

Laserliner ThermoVisualizer Pro Thermal Imaging Camera with Visual Dew Point

Pinpoints surfaces at or below dew point — exactly where condensation starts.

The Laserliner ThermoVisualizer Pro thermal imaging camera combines surface temperature, relative humidity, ambient temperature and dew point readings in one instrument. Infrared measurement covers -20 °C to 400 °C, and the kit ships with a micro SD card, USB-C cable and soft bag.

Visual dew point mode reveals condensation risk

Readings from the infrared sensor, digital camera and hygrometer merge into a single image that marks the critical areas directly on screen. One button switches to this mode, made for interior inspections where damp or mould needs explaining.

96 x 96 px microbolometer with 0.06 °C thermal sensitivity

The uncooled sensor works in the 8–14 µm band at 9 Hz and separates the smallest temperature differences across walls, pipes and switchboards. A focus-free 50° lens means you simply aim and read.

Four image modes for a clear report

Infrared, digital, MIX and dew point views switch to suit the job, while selectable colour palettes highlight the range that matters. A centre spot plus MIN/MAX readings supply the figures for your report.

IP 54 housing at just 275 g for site work

Dust and splash protection suits basements, plant rooms and building sites. The ergonomic body sits in one hand, and the 1/4" thread takes a standard tripod for longer monitoring sessions.

Documentation via micro SD card and USB-C

Images are stored as BMP files on cards up to 32 GB and transfer to a PC over USB-C, with the camera recognised as mass storage. The built-in 3.6 V / 2.55 Ah Li-ion pack runs for about 4 hours, and auto power off saves charge between measurements.