Cordless tool combo kits

DEWALT DCK2223MP2T-QW 18V XR Brushless Combo Kit: DCD86M Combi Drill and DCG45M 125 mm Angle Grinder, 2 x 5.0 Ah, TSTAK Case

Drill, drive, cut and grind on one battery platform, with a spare pack always charged.

The DEWALT DCK2223MP2T-QW McLaren F1 Team Special Edition kit pairs the brushless DCD86M combi drill with the DCG45M 125 mm angle grinder. Both tools run on the DEWALT 18V XR battery platform, and the TSTAK case holds two 5.0 Ah packs plus a DCB1104 multi-voltage charger for uninterrupted professional use.

90 Nm of torque for masonry, metal and timber

The DCD86M combi drill runs a two-speed all-metal gearbox with a 13 mm keyless chuck. It drills up to 55 mm in wood and 13 mm in steel and masonry, while 15 clutch settings keep repeat screwdriving consistent.

Compact 1.7 kg body with 3-mode LED light

At 177 mm long, the drill reaches between studs, inside cabinets and in service shafts. An anti-rotation system shuts the tool down if the bit binds, and the electronic brake stops the chuck the moment the trigger is released.

DCG45M grinder with electronic kickback brake

An electronic clutch and brake stop the wheel if it jams in the cut. Soft start limits the initial kick, the spindle is M14, and sealed bearings with mesh debris covers keep grinding dust out when cutting metal or masonry.

Two 5.0 Ah packs and a DCB1104 multi-voltage charger

One pack works while the other charges, and the fuel gauge shows remaining capacity before you start the next task. The DCB184 packs fit every tool on the DEWALT 18V XR platform.

TSTAK case carries the whole kit

Both tools, the batteries, charger, side handle, guards and hex key stow in a single TSTAK case that stacks and locks with the rest of the system. The kit belongs to the McLaren F1 Team Special Edition range.