DeWALT DCK2020P2T-QW 18V XR Brushless Combo Kit: DCD791 Drill/Driver and DCG405 Angle Grinder, 2 x 5.0 Ah, TSTAK Case
Drilling, driving and cutting on one battery platform, with no downtime for charging.
The DeWALT DCK2020P2T-QW 18V XR brushless combo kit pairs the DCD791 drill/driver with the DCG405 angle grinder in a single TSTAK case. Two 5.0 Ah lithium-ion batteries and a charger are included, and both tools are built for professional use.
Up to 70 Nm of torque from the DCD791 drill/driver
A two-speed gearbox covers 0–550 and 0–2000 rpm, so you pick torque for long screws or speed for drilling. The drill handles up to 40 mm in timber and 13 mm in steel.
1.5–13 mm chuck and LED light for dark corners
The chuck grips both small bits and large drills without extra adaptors. The built-in LED lights the drilling point inside cabinets, shafts and other enclosed spaces.
DCG405 angle grinder for 125 mm discs
It spins at 9000 rpm and uses an M14 spindle for standard discs, from cutting metal to dressing welds and prepping surfaces. The brushless motor sends more of its power straight to the disc.
Brake and electronic clutch for safer cutting
The grinder stops its disc in under 2 seconds once you release the trigger. An electronic clutch limits kickback if the disc binds in the cut.
Two 5.0 Ah batteries and a TSTAK case for the jobsite
While one battery works, the other charges, with a full cycle taking 75 minutes. Both packs fit every tool in the DEWALT 18V XR system, and the TSTAK case carries the two machines, the charger and the batteries together.
Specifications
General
DeWALTBrand
DCK2020P2T-QWModel
245625Article no.
5035048734285EAN
DCD791 brushless drill/driverTool 1
DCG405 brushless angle grinderTool 2
BrushlessMotor type
Professional useSuitable for
Power and batteries
DEWALT 18V XRCompatible battery system
18 VVoltage
Li-IonBattery type
2Number of batteries
5.0 AhBattery capacity
75 minCharging time
YesCharger
DCD791 drill/driver
460 WDCD791 power
0–550 / 0–2000 rpmDCD791 no-load speed
70 NmMax torque
1.5–13 mmChuck
40 mm / 13 mmDrilling capacity in wood / metal
1.1 kgDCD791 weight (without battery)
DCG405 angle grinder
800 WDCG405 power
9000 rpmDCG405 no-load speed
125 mmDisc diameter
M14Spindle thread
1.74 kgDCG405 weight (without battery)
In the box
DCD791 drill/driver, DCG405 angle grinder, 2 x 5.0 Ah batteries, charger, TSTAK caseIn the box