CERLAND Bolt-Down Post Base for 7x7 cm Posts, 15 cm High
Anchors a wooden post to concrete, a terrace or an existing footing in minutes.
The CERLAND bolt-down post base is a metal support for wooden posts with a 7x7 cm section. It is fixed with anchors or bolts to a solid surface and receives the end of the post in its open profile. Typical uses include fences, fence panels, pergolas, canopies and garden structures built on a concrete slab or terrace.
Bolts to an existing surface, no digging
The pre-drilled plate is fastened to concrete, a reinforced slab or a timber deck. The post slides into the profile and is secured with screws through the side walls, so it can be dismantled or replaced later.
Post end kept above the wet surface
The base lifts the timber above slab level, so water does not stand against the end grain. The fence or pergola keeps its geometry season after season.
Sized for 7x7 cm CERLAND posts
The profile takes standard 7x7 cm wooden posts, including the 7x7x180 cm, 7x7x210 cm and 7x7x240 cm models in the range. Allow one base per post when setting out a fence line.