Metal post with built-in fixing strips: roll fencing clips straight on, no extra hardware needed.
The BETAFENCE Bekaclip fence post is a round Ø48 mm steel post, 2.00 m long, designed for wire mesh fencing supplied in rolls. Stainless steel clips fasten the mesh through the integrated fixing strips that run along the post. It can be set in concrete or mounted on an existing base with a dedicated base plate.
Full-length fixing strips for clips
The mesh is secured with Ø3.50 mm stainless steel clips, fitted using Bekaclip tongs. Installation moves fast with very few extra accessories, and the tension stays even over the full height of the fence.
Two-layer corrosion protection for outdoor use
The steel is galvanised inside and out with 275 g/m² combined, then finished with a polyester coating of at least 60 microns. The combination keeps the post free of rust under constant exposure to rain, sun and ground moisture.
Works with mesh rolls and with fence panels
The post accepts Pantanet and Fortinet mesh rolls, while a Ø48 mm collet fixing lets you mount Bekafor and Zenturo panels on the same post. Base plates for concrete foundations and extension arms for barbed wire are available within the range.
Specifications
Main
BETAFENCEBrand
BekaclipModel
Fence postType
436915Article code
5412298060645EAN
Dimensions & weight
2.00 mHeight
Ø48 mmDiameter
1.20 mmWall thickness
3.950 kgWeight
Materials & coating
SteelMaterial
275 g/m² (both sides combined)Galvanisation
min. 60 micronsPolyester coating
Installation
Integrated fixing strips + Ø3.50 mm stainless steel clipsMesh fastening