English 
FENCE POST 1.50M WITH MOUNTING PLATE 6203
- FENCES TYPE : СТЪЛБ
Fence Post 1.50 m with Mounting Plate 6203, 60/40 mm Profile
60/40 mm profile with pre-punched holes for clamps and a base plate for anchoring to concrete.
The 1.50 m fence post with mounting plate, model 6203, is the load-bearing element for fence panels and mesh. Its rectangular 60/40 mm profile comes with factory-punched holes for clamps, while the welded base plate bolts straight onto a concrete footing or kerb.
Base plate installation without digging
The footplate is fixed with anchor bolts onto an existing concrete footing, kerb or wall. It is the go-to solution when the fence line runs over paving and you would rather not dig and concrete each post in.
60/40 mm profile with pre-punched clamp holes
The holes are punched at the factory along the post, so panel clamps bolt on directly with no on-site drilling. The rectangular section carries the load from the panels and the wind pressure along the fence line.
1.50 m height for garden fencing
The length suits panels and mesh up to roughly 1.2 m high and still leaves clearance above ground level. The post belongs to a series offered in 1.25 m, 1.50 m, 1.75 m and 2.00 m lengths, so the height can be matched to the chosen panel.
Specifications
Main
Dimensions & weight
Main
| MODEL | 6203 |
| FENCES TYPE | СТЪЛБ |
| DIMENSION (H, W, D) | 1.50m |
| WEIGHT | 3.800 kg |
| ADDITIONAL INFORMATION | С ПЛАНКА 60/40 И ОТВОРИ |
| WARRANTY | 60 MONTHS |
| EAN | 3800234400372 |